When the cable is worn, the sheath must not be damaged, and a non-corrosive lubricant (powder) can be used. The AC single-core cable must not be penetrated into the steel pipe alone.
In the following locations, the cable should have a protective tube with a certain mechanical strength or a protective cover:
1 Cable enters buildings, tunnels, and through floors and walls.
2 From the channel to the pole, equipment, the outer surface of the wall or the pedestrians in the house are easily accessible, a section below the ground height of 2m.
3 Other places that may be subject to mechanical damage.
The depth of the protective tube buried in the non-concrete ground shall not be less than 100mm; the length of the scattered water slope of the building shall not be less than 250mm, and the root of the protective cover shall not be higher than the ground.
There should be no water inside the pipe and no blockage of debris. When the cable is worn, the sheath must not be damaged, and a non-corrosive lubricant (powder) can be used.
The AC single-core cable must not be penetrated into the steel pipe alone.
Ethernet Slip Ring is a device that allows Ethernet signals to be transmitted through a rotating assembly. This device is typically used in applications where it is not possible or practical to run Ethernet cables, such as in an application where the cables would have to travel through a hazardous area. It converts the regular Ethernet signals into rotary signals, which are then transmitted through the rotating assembly.
There is a growing trend in the industry for Ethernet slip rings. Ethernet slip rings are currently being used to interconnect computer networks. A slip ring is a transmission device that uses a counter-rotating encircling belt to transfer power and data between two or more devices.
Senripgrid Conductive Slip Ring has the following characteristics Direct unplugging of the RJ45 connector Upon reaching eight simultaneous ports, follow the standard cable connection method Work with either copper or gas-liquor joints Transmission to the external network (10M, 100M, 1Km Base T).
Ethernet Slip Ring,Generator Collector Rings,Through Bore Rotary Union,Rotary Pressure Joint
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproub.com