The power regulator is a panel mounted power adjustment unit that uses a thyristor (also called a thyristor) and its trigger control circuit to adjust the load power. More now is the use of digital circuits to trigger thyristors to achieve voltage regulation and power regulation. Voltage regulation adopts phase-shift control method, and power regulation has fixed-cycle power regulation and variable-cycle power regulation.
* Adopt phase-shift triggering method, suitable for resistive and inductive loads, transformer primary side
* Has a variety of control signal options.
* With "automatic current limiting" function, when the load current is greater than the rated value, the output current of the regulator is limited to about the rated value.
* With soft start and soft shut-off functions to reduce the impact and interference on the power grid, so that the main circuit thyristor is more safe and reliable.
* With constant voltage, constant current, constant power three feedback forms for the user to choose.
* The power regulator has input power supply phase-off, over-current, thyristor overheating and other protection functions. When the protection, the corresponding LED indicator light is on, and the fault alarm output contact point action.
* Integrated structure of main circuit and control circuit, small size, light weight, very convenient for use and maintenance
* Adopt phase-shift triggering method, suitable for resistive and inductive loads, transformer primary side
* Has a variety of control signal options.
* With "automatic current limiting" function, when the load current is greater than the rated value, the output current of the regulator is limited to about the rated value.
* With soft start and soft shut-off functions to reduce the impact and interference on the power grid, so that the main circuit thyristor is more safe and reliable.
* With constant voltage, constant current, constant power three feedback forms for the user to choose.
* The power regulator has input power supply phase-off, over-current, thyristor overheating and other protection functions. When the protection, the corresponding LED indicator light is on, and the fault alarm output contact point action.
* Integrated structure of main circuit and control circuit, small size, light weight, very convenient for use and maintenance
The mechanical Buzzer uses a magnet to move a reed up and down quickly to emit a lower-pitch buzz! It's quieter than the piezoelectric buzzer but uses more power, so you the terminals will have to be closer to the battery packs. To use them, you'll need to match the wire colors to the wires from the battery pack.
Piezo Beeper,Mechanical Buzzer,Piezo Mechanical Buzzer,Low Frequency Mechanical Buzzer
Jiangsu Huawha Electronices Co.,Ltd , https://www.hnbuzzer.com