The latest model "Spot Cure SPL-2" for the "Spot Cure Series" of the ultraviolet (UV) spot irradiation device will be available for the Oxtail Motor. In order to overcome the shortcomings of the original LED model - short life, illuminance attenuation and other issues, the oxtail motor uses the built-in LED of the body. The launch of the new product will facilitate the replacement of the light source of the point source UV illumination device from the lamp to the LED.
Various processes such as electronics, automobiles, and medical devices use a process in which a small area of ​​about 1 to 10 mm in diameter is irradiated with UV light, and the resin is cured, bonded, packaged, and peeled off. The light source of the point source UV irradiation device used in the process has a tendency to be replaced by an original UV lamp into an LED. However, when the light source is an LED, there is a problem that the life of the LED is short, the illuminance is attenuated, the yield is lowered, and the shape of the heat dissipating mechanism provided at the tip end portion is particularly restricted to the construction of the production line.
The reason for the above problem is that the heat generated by the LED embedded in the tip end portion of the original LED point source UV irradiation device is hard to be dissipated. In this regard, the oxtail motor adopts a method of embedding the LED into the body of the device, and directing the light emitted by the LED with the optical fiber to illuminate the tip end portion. At this time, in order to efficiently use UV light, the light emitted from the LED is efficiently introduced into the optical fiber by an autonomous optical design, and the high-efficiency liquid optical fiber is used to efficiently guide the light to the tip of the optical fiber. As a result, the life of the LED is extended by a factor of two, and the illuminance decay rate is improved from about 15% to 3%. It is said that the end portion of the illumination can be completely eliminated from the heat sink.
With the improvement of people's quality of life, people's lifestyles have also become varied. Different kinds of recreational products are starting to appear in people's lives, such as electronic cigarettes. The emergence of e-cigarettes represents a part of young people's thinking and means that electronic products are beginning to show a trend towards diversity.
simply replace the pods. The Pod system uses an integrated pod rather than a tank for higher nicotine strength and provides low power traction. the Pod system is rechargeable and has a longer life and higher battery capacity than disposable electronic cigarettes.
Our company Pod system has a built-in 380mAh battery and a USB charging port on the bottom. In comparison, the Pod system has a built-in battery of only 180mAh, but the Pod system charges much faster.
Our electronic cigarettes are of rechargeable construction. The first time you use the charger to charge, it is recommended to use up the remaining power before filling up, this is to ensure the performance of the battery.
Vape Pod System Oem,Vape Pod Oem,Close Pod Oem,Thc Pod Disposable
Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com