1. Suitable for structured premised cabling;
2. For transmission of digital and analogue voice and data signals
3. Especially suitable for all Class F applictions;
4. ISDN, Ethernet 10 Base-T, Fast Ethernet 100 Base-T, Gigabit Ethernet 1000Base-T, 10G Base T(IEEE802.3)
5. Token Ring4/16 Mbit/s, TP-PMD/TP/DDI 125bit/s, ATM155Mbit/s(IEEE 802.5)
Electronic Characteristics
Impedance: 4-100MHz 100± 15(ohms).
100-200MHz 100± 22(ohms).
200-1000MHz 100± 32(ohms).
Max. Conductor DC Resistance 20º C: 8.4(ohms/100m)
Resistance unbalance(%): Max2.5
Pair-to-Ground Capacitance Unbalance: 330(Pf/100m)
Transfer Impendance: Max 10 mohms/m@100MHz.
Coupling Attenuation: Min 80 Db.
Installation temperture: 0-50º C.
Operation temerture: -20~60º C
| Assortment | Shieded | Describe |
| Cat 7 Installation cable | S/FTP Shielded | S/FTP Shielded Cat 7 Twisted Pair Installation cable |
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Conductor | ||||||
| Conductor | Insulation | Qty of Conductor | Color code | Indiviual pair shied | Overall shield | Drain wire |
| Solid Bare Copper 23AWG | PE(skin-Foam-Skin) | 8,twisted in 4 pairs | blue-white,    orange-white,          green-white,  brown-white | AL-Foil, 100%coverage,foil face out | Tinned copper braid |
None  |
|  |  Outer jacket information |  |
| Â Item no | Â Outer jacket | Â overall diameter(mm) |
|  D195-P |  CMX |  8.3±0.3 |
|  D195-C |  CM |  8.3±0.3 |
|  D195-R |  CMR |  8.3±0.3 |
|  D195-L |  LSZH |  8.3±0.3 |
|  D195-E |  LDPE |  8.3±0.3 |
Sample show
Our Services
 WebiTelecomms not only takes pride in the quality of our products, but also in the security we give our customers by standing behind them with a complete warranty. We put our products through rigorous performance tests throughout their production cycle before they reach our customers. Knowing to expect the unexpected, we ensure our customer's satisfaction with a standard and extended warranty.
Standard Warranty
One year limited warranty on WebiTelecomms Products(Except man-made,natural disaster,special environmental corrosion).
Extended Warranty
3-Year limited warranty on WebiTelecomms Products, upon registration for extended warranty.
Standard and Extended Warranty Terms/Conditions
WebiTelecomms guarantees that all Products are free of production defects and will honor warranty claims except where:Â
1Â Product has been altered in such way as to affect the Product.
2 Product has been subject to negligence by Buyer.
3Â Product has not been used in accordance with normal practices and/or the recommendations.
4Â Product has been destroyed by natural disaster,special environmental corrosion
NOTIFICATION OF DEFECTS. Buyer shall notify WebiTelecomms in writing within 30 days of discovering a defect. Failure to do so, will disqualify the Product from its warranty.
WARRANTY LIMITATIONS. Upon receiving notice of defective Product, WebiTelecomms will negotiate with buyer how to handle the defects,compensation,replacement or refund the purchanse price in new business.
Both WebiTelecomms & the Buyer agree that this warranty and all legal action between each other shall be construed under and governed by the rules of the China Busines Council in the buyer's country.
FAQ
Who is WebiTelecomms?
Since 2003,SINO LINK(WebiTelecomms's HQ) was built, WebiTelecomms has grown considerably to become a leading supplier of integrated cabling products in China. We owe our success to vast and diversified range of indoor/outdoor 19''cabinets,PDU and other cabling products,professional
production technology,expert knowledge of the markets and a reputation for superior customer satisfaction.
With the unique location advantage of Ningbo port,WebiTelecomms has exported to over 30 countries.Though under the increasing competitive pressure in the global market,we keep looking for new opportunities and challenges.
Why Choose WebiTelecomms Co.,Ltd?
1.Innovative and complete solution providerÂ
2.Professional and timely technical support
3.Comprehensive certificate authenticationÂ
4.Strict testing and packing section
5.Stocks available
6.OEM/ODM production service
7.Perfect after-sales serviceÂ
8.1 year warranty period after sales(except man-made,natural disaster,special environmental corrosion)
1)    What is your Payment term?
---TT, LC, Western Union could be accepted.
2)    What is your Trade term?
---EXW, FOB, CNF, CIF is also ok.
3)    What is the Loading Port?
---Â Ningbo,Shanghai.
4)    What is your MOQ?
---MOQ of most our products is 5pcs, different items will be different. We have indicated the MOQ for each item
in the price list.
5)    What is your Product Warranty?
---As Europe market, we have CE RoHS and other international safety standard for our products.
---As other market,international safety standard certificate also could be provided.
Appliacation1. Suitable for structured premised cabling;
2. For transmission of digital and analogue voice and data signals
3. Especially suitable for all Class F applictions;
4. ISDN, Ethernet 10 Base-T, Fast Ethernet 100 Base-T, Gigabit Ethernet 1000Base-T, 10G Base T(IEEE802.3)
5. Token Ring4/16 Mbit/s, TP-PMD/TP/DDI 125bit/s, ATM155Mbit/s(IEEE 802.5)
Electronic Characteristics
Impedance: 4-100MHz 100± 15(ohms).
100-200MHz 100± 22(ohms).
200-1000MHz 100± 32(ohms).
Max. Conductor DC Resistance 20º C: 8.4(ohms/100m)
Resistance unbalance(%): Max2.5
Pair-to-Ground Capacitance Unbalance: 330(Pf/100m)
Transfer Impendance: Max 10 mohms/m@100MHz.
Coupling Attenuation: Min 80 Db.
Installation temperture: 0-50º C.
Operation temerture: -20~60º C
| Assortment | Shieded | Describe |
| Cat 7 Installation cable | S/FTP Shielded | S/FTP Shielded Cat 7 Twisted Pair Installation cable |
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Conductor | ||||||
| Conductor | Insulation | Qty of Conductor | Color code | Indiviual pair shied | Overall shield | Drain wire |
| Solid Bare Copper 23AWG | PE(skin-Foam-Skin) | 8,twisted in 4 pairs | blue-white,    orange-white,          green-white,  brown-white | AL-Foil, 100%coverage,foil face out | Tinned copper braid |
None  |
|  |  Outer jacket information |  |
| Â Item no | Â Outer jacket | Â overall diameter(mm) |
|  D195-P |  CMX |  8.3±0.3 |
|  D195-C |  CM |  8.3±0.3 |
|  D195-R |  CMR |  8.3±0.3 |
|  D195-L |  LSZH |  8.3±0.3 |
|  D195-E |  LDPE |  8.3±0.3 |
Sample show
Our Services
 WebiTelecomms not only takes pride in the quality of our products, but also in the security we give our customers by standing behind them with a complete warranty. We put our products through rigorous performance tests throughout their production cycle before they reach our customers. Knowing to expect the unexpected, we ensure our customer's satisfaction with a standard and extended warranty.
Standard Warranty
One year limited warranty on WebiTelecomms Products(Except man-made,natural disaster,special environmental corrosion).
Extended Warranty
3-Year limited warranty on WebiTelecomms Products, upon registration for extended warranty.
Standard and Extended Warranty Terms/Conditions
WebiTelecomms guarantees that all Products are free of production defects and will honor warranty claims except where:Â
1Â Product has been altered in such way as to affect the Product.
2 Product has been subject to negligence by Buyer.
3Â Product has not been used in accordance with normal practices and/or the recommendations.
4Â Product has been destroyed by natural disaster,special environmental corrosion
NOTIFICATION OF DEFECTS. Buyer shall notify WebiTelecomms in writing within 30 days of discovering a defect. Failure to do so, will disqualify the Product from its warranty.
WARRANTY LIMITATIONS. Upon receiving notice of defective Product, WebiTelecomms will negotiate with buyer how to handle the defects,compensation,replacement or refund the purchanse price in new business.
Both WebiTelecomms & the Buyer agree that this warranty and all legal action between each other shall be construed under and governed by the rules of the China Busines Council in the buyer's country.
FAQ
Who is WebiTelecomms?
Since 2003,SINO LINK(WebiTelecomms's HQ) was built, WebiTelecomms has grown considerably to become a leading supplier of integrated cabling products in China. We owe our success to vast and diversified range of indoor/outdoor 19''cabinets,PDU and other cabling products,professional
production technology,expert knowledge of the markets and a reputation for superior customer satisfaction.
With the unique location advantage of Ningbo port,WebiTelecomms has exported to over 30 countries.Though under the increasing competitive pressure in the global market,we keep looking for new opportunities and challenges.
Why Choose WebiTelecomms Co.,Ltd?
1.Innovative and complete solution providerÂ
2.Professional and timely technical support
3.Comprehensive certificate authenticationÂ
4.Strict testing and packing section
5.Stocks available
6.OEM/ODM production service
7.Perfect after-sales serviceÂ
8.1 year warranty period after sales(except man-made,natural disaster,special environmental corrosion)
1)    What is your Payment term?
---TT, LC, Western Union could be accepted.
2)    What is your Trade term?
---EXW, FOB, CNF, CIF is also ok.
3)    What is the Loading Port?
---Â Ningbo,Shanghai.
4)    What is your MOQ?
---MOQ of most our products is 5pcs, different items will be different. We have indicated the MOQ for each item
in the price list.
5)    What is your Product Warranty?
---As Europe market, we have CE RoHS and other international safety standard for our products.
---As other market,international safety standard certificate also could be provided.
brightness
LCD is a substance between solid and liquid. It can't emit light by itself, so it needs additional light source. Therefore, the number of lamps is related to the brightness of the Liquid Crystal Display. The earliest liquid crystal displays had only two upper and lower tubes, the lowest of the popular type was four lamps, and the high-end one was six lamps. The four-lamp design is divided into three types of placement: one is that there is a lamp on each of the four sides, but the disadvantage is that there will be dark shadows in the middle. The solution is to arrange the four lamps from top to bottom. The last one is the "U"-shaped placement form, which is actually two lamp tubes produced by two lamps in disguise. The six-lamp design actually uses three lamps. The manufacturer bends all three lamps into a "U" shape, and then places them in parallel to achieve the effect of six lamps.
Tip: Brightness is also a more important indicator. The brighter the LCD, the brighter the LCD, it will stand out from a row of LCD walls. The highlight technology we often see in CRT (ViewSonic is called highlight, Philips is called display Bright, BenQ is called Rui Cai) is to increase the current of the shadow mask tube to bombard the phosphor to produce a brighter effect. Such a technology is generally traded at the expense of image quality and the life of the display. All use this The products of this kind of technology are all bright in the default state, you always have to press a button to implement, press 3X bright to play the game; press again to turn to 5X bright to watch the video disc, a closer look is blurred, you need to watch The text has to be honestly returned to the normal text mode. This design actually prevents you from frequently highlighting. The principle of LCD display brightness is different from that of CRT. They are realized by the brightness of the backlight tube behind the panel. Therefore, the lamp has to be designed more so that the light will be uniform. In the early days when selling LCDs, it was a great thing to tell others that there were three LCDs. But at that time, Chi Mei CRV came up with a six-lamp technology. In fact, the three tubes were bent into a "U" shape. The so-called six; such a six-lamp design, plus the strong luminescence of the lamp itself, the panel is very bright, such a representative work is represented by VA712 in ViewSonic; but all bright panels will have a fatal injury , The screen will leak light, this term is rarely mentioned by ordinary people, the editor personally thinks it is very important, light leakage means that under a completely black screen, the liquid crystal is not black, but whitish and gray. Therefore, a good LCD should not emphasize brightness blindly, but more emphasis on contrast. ViewSonic's VP and VG series are products that do not emphasize brightness but contrast!
Lcd Display,LCD Screen,Lcd Tft Display Screen,4 Inch Mipi Lcd Screen,Square Tft Lcd Display
ESEN Optoelectronics Technology Co., Ltd, , https://www.esenlcd.com