In the process of using the LED display , the loading failure will occur, which is annoying. How can we solve this kind of problem quickly? Maybe these six points can help you.
1. Check if the jumper cap is loose or fall off ; if the jumper cap is not loose, please make sure that the jumper cap is in the correct direction.
2. Check that the serial cable used to connect to the controller is a straight-through cable, not a crossover cable.
3. Check and confirm that the serial port cable is intact and there are no loose or falling ends.
4. Compare the energy-saving LED display control software and the control card of your choice to select the correct product model, the correct transmission mode, the correct serial port number, the correct serial transmission rate, and correctly compare the DIP switch diagram provided in the software. Set the address bit and serial transfer rate on the control system hardware.
5. Ensure that the control system hardware is properly powered.
6. If the above check and correction still fails to load, please use a multimeter to measure whether the serial port of the connected computer or control system hardware is damaged. To confirm whether it should be returned to the computer manufacturer or return the control system hardware for testing.
In short, the reason why the outdoor LED display is not loaded properly may be caused by the product itself, or it may be caused by improper operation during use. As long as you think carefully or ask the manufacturer, it is easy to find the root of the problem.
Modern Physics Experiment Series
Modern physics experiment related equipment for efficient specialized physics laboratory
Modern Physics Experiment Instruments,Optical Instruments,Acousto-Optic Modulator Experimental Device,Optical Spectroscopy Experiment Determinator
Yuheng Optics Co., Ltd.(Changchun) , https://www.yhenoptics.com